銆??鍒朵綔璇存槑锛氭兂鍋氱殑鏄釜绫讳技铚曞彉鐨勫３鎴栬?铔逛竴鏍风殑鐗╀綋锛屼絾鍙堜笉鎯冲お鍛嗘澘鐨勫舰鐘跺拰棰滆壊銆?Therefore, the effects were more transparent, increasing the feeling of some vapor and light perception, it appears to be in all the time is changing, and not a shell placed there. The final results are still many areas of improvement, only a brief description of the background a bit. This slowly and then described below.
Many people are reflected in the previous tutorial, how to do all I feel like the effect, in fact I do not advocate completely shining like the article, because there is no very strict procedure, I suggest you explore their own methods, and detailed implementation steps need people to explore their own, as long as the results are almost on the line. The most important is to understand some of the consequences of the practice, which can then be flexibly applied to other places. The author details as far as possible a number of steps that, together with some operations in the picture, the best this we Nengkanmingbai.
This began to spray it, because more steps, suggest that you bring toilet Shanghao backs with which to step back forget to do it ... ...
I want to see clearly, with a dark background behind shop, as long as no black on the line, preferably color, this can have room for some light play.
Finalized renderings
First, draw a desired shape, the shape is arbitrary. Looks like you want as long as the effect on the line. This step is to use the path to be. To facilitate future changes. Whenever the path of the filling should be filled better than the constituency. The author of this current shape is modified from the oval.
Look at the path around
銆??鐒跺悗灏嗗垰鐢诲ソ鐨勯儴鍒嗗鍒朵竴灞傦紝濉厖鎴愰粦鑹诧紝鍐嶅皢瀹冨悎骞跺埌涓?釜绌哄眰涓? Remove the path attribute, to facilitate the transition with a rubber tool erase the shadow. The purpose of this step is just to complete the general to describe the shape out, color tutorials have said before, the performance of shadow and just an important means of three-dimensional objects. Somewhat similar to the sketch of "the tone."
Struck a rough part of the reserved areas of light that can not shine.
17% to adjust the transparency of the shadow of a more natural number. Can see that the sphere can be seen to this time a little.
Do this step once, but this time to retain part of the shadow under the semicircle, as the shadow of the lower half sphere will be more deeply, to move a few pixels, showing a white edge. This will help describe the three-dimensional.
[Next]
銆??鐒跺悗鎻忕粯涓?簺鐗╀綋琛ㄩ潰鐨勮蛋鍚戯紝灏嗗垰鎵嶇殑璺緞澶嶅埗涓?釜锛岀劧鍚庡彧瑕佷慨鏀瑰乏杈瑰拰涓婅竟涓や釜鑺傜偣鐨勬帶鍒舵焺闀垮害锛屽氨鍙互鍋氬埌杩欎釜褰㈢姸銆?br />
This is filled with black.
And the same way as before, with the eraser part of a shadow. You can see the effect of bump will appear.
銆??鍐嶈繘琛屼竴娆′笂闈㈢殑姝ラ锛屽仛鍑哄彟涓?釜鐩稿悓鐨勯儴鍒嗭紝鏁堟灉鐪嬩笅闈?
銆??鐜板湪鐢ㄨ矾寰勭敾鍑轰竴涓唴閮ㄧ殑鏍稿績銆?The following is probably the path.
銆??娉ㄦ剰杩欎釜褰㈢姸闇?涓?釜鍥惧眰鏁堟灉锛屽悓鏃?9%鐨勫師鑹查?鏄庡害锛屾柟娉曚笂娆′篃璇磋繃銆?In the Layers panel, this section will only affect the path of the color, the depth will not affect the results.
At the same time an inner glow settings shown to increase
After the above steps, once again copied one of the most bottom path, reducing the overall point, adjust the path shown, it felt included, while a little thickness to the periphery.
The following step is to describe the shape object center, all through the layer effect to complete, step more. You had better look more closely at the final results, pay attention to set the parameters. Then try to adjust themselves.
[Next]
銆??鍚屾牱鐨勶紝17%鍘熻壊閫忔槑锛宨nner glow鏁堟灉锛岃缃細
The effect of this step:
Then add a pattern overlay, set the figure:
Results shown in Figure:
銆??鍐嶅姞鍏ヤ竴涓狦radient overlay锛屽鍔犱竴涓繃娓★紝璁╃敾闈㈢湅璧锋潵涓嶄細閭ｄ箞骞炽? Covered with a white top, the other transparent. This step may need to try all their own, because the color of the initial location of the transition and the transition color is different. I figure the specific settings:
Current results:
Finally, add a Color overlay, because the present looks bright color is not enough. The setting is as follow:
The final results. To this step, the effect of this layer is completed. You had better take note at this time covered by the order of layers, which in the what next. Some of the above should be covered by a transparent reflect the following elements. Need to carefully control the way the current look.
[Next]
Well, let's you to continue the trial. Here I feel the need of a flare, as found in the right part of the lack of a description of some light. Then fill a white constituency
Then add a Gaussian Blur, counselor to adjust to the next map like this. Not too much. Then again a little wiped with a rubber, a trim.
Painted with a high-light the path part. Almost on the line shape, the shape of the main theme is to go along.
銆??17%鍏冭壊閫忔槑锛宨nner glow鏁堟灉锛岄兘鍜屼笂闈竴鏍枫? Setting map:
Then draw another:
Ah ~ there is one, these same settings. Shape is arbitrary, we thinks is like, and feel nice shape. Anyway, is to make sense of things inside.
Also use the bottom path, and copy the layer, and then specify a color, see next renderings to note here, and then think about his position in the layer.
And the same way as before, create a new blank layer and merge him, then do not use an eraser to the area:
[Next]
銆??鎸囧畾涓?釜灞傚彔鏁堟灉Color Burn锛岃繖鏍峰彲浠ヨ鍚庨潰鐨勯槾褰辩湅璧锋潵涓嶆槸鍏ㄧ伆鑹茬殑锛屽洜涓虹瑪鑰呴渶瑕佷粬浠拰褰撳墠鐨勯鑹插懠搴旇捣鏉ャ?
This time need to look at the overall picture, I feel where you want to add some color to. The author at this time for the two parts of the constituency on the screen to add a little color. Results shown in Figure. This step is to see everyone's feeling, is not necessary.
Currently the subject of some basic drawing has completed. Effect diagram below. Need to sort out the relationship between layers. Will be described later in other parts of the element. The best current summary of what all the layers. Avoid too much confusion layer.
Now ready for the white silk line, the path is drawn, like directly, and to echo the needs and shape up, keep only the effect of fully transparent colors, effects, and the same as just before the inner glow on the line.
Copy layer is still out, because this path can be reused later. Then create a new layer, merge it and the path layer, in addition to do not with the eraser part, it looks soft number.
銆??閲嶅涓婇潰鐨勬楠わ紝鐢诲嚭鍙︿竴涓? This section of the form is arbitrary. Just look nice on the line.
Do a:
The combined effect of three:
Now do the refraction of light effect. Copy the whole layer of the body, will it be stretched to almost the reflection of the position:
Adjust the cascading effect of overlay:
[Next]
銆??鐢ㄦ鐨摝鍘讳竴閮ㄥ垎锛?br />
Doing about Gaussian Blur, looks comfortable on the trip.
銆??澶嶅埗涓?釜锛屽啀鎿︽摝锛?br />
I think that should be followed and a glossy section, where:
Filled blue, and then Gaussian Blur, choose cascading effect Overlay:
銆??濂藉暒锛岀洰鍓嶆渶鍚庝慨璇曚竴涓嬶紝绗旇?鍦ㄨ繖閲屽～鍔犱竴涓槾褰憋紝涓?釜鍏夋檿锛?br />
Final results:
相关链接:
Picked Search Or Lookup Tools
Iphone video format
Vertical Market Apps Shop
Flv To Mp3 Converter Free Download
Video To 3GP Converter Free Download
Apple PSP Cell Phone Convert
Youtube To M4V Application
ColeSoft DVD Ripper Platinum
Mp4 To Mpeg Converter Free Download
Swift M4V FLV Deconde
Best Calculators And Converters
Youtube FLV To TV Pack
INSTANT Video Autorun
Apolo DVD Editor
Flv to mp3 converter
Health And Nutrition for you
